🌲5%off over $60🌲Free shipping over $70

How to wire led daytime running lights?


SPECIFICATION

Product name: Car LED Daytime Running Light
Material: Silicone /LED
Input Voltage: 12V
Suitable: Universal for all the cars
Working Temperature: -40~50 Celsius
Light thickness: 0.3 cm (About 0.12 inch)
Light Size: 30 cm / 45 cm / 60 cm (About 11.81 inch / 17.72 inch / 23.62 inch)

WIRE CONNECTION:

Red Wire: +12V/ACC, always on when driving
Black wire: - GND / ground (negative power supply)
Yellow wire: connecting to turn signal (+)

​Buy attributes: Only white does not need to connect yellow wire, only red and black two wires
How to find the ACC on the car
Find the ACC in your fuse box and tap the red wire there. You can find the ACC location with an electronic meter by clamping the black wire to the battery negative or the ground. Insert the tester pen into the open fuse box into any unoccupied slot and remember the locations where the tester pen doesn’t light up. Start the engine and test on the spots that didn’t light up. Find the spot that lights up ONLY when the engine is on. This is the ACC spot.

Basically, when the engine is on, the indicator lights up. When the engine is off, the indicator is also off.
Once you find the ACC location, you can tap the red wires to the blade of the fuse and insert it back.
Tap the black wire to battery negative.